Schletter

Additional connector kit for FixZ-15 above Also to be bolted to the profile! ‚ If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: 129019-011 Weight: 0.1 kg An experienced manufacturer of professional solar mounting systems, Schletter offers a variety of fasteners for photovoltaic modules. The systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability, all at attractive prices. Schletter also offer a durability warranty of 10 years. Schletter systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability at attractive prices. All systems are produced exclusively in Kirchdorf/Haag in Upper Bavaria.

Base Rail for Fix Grid and Flat Grid 4200mm.‚ FixGrid fixgrid If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: 128039-214 Weight: 3.5 kg Length: 4.2 m An experienced manufacturer of professional solar mounting systems, Schletter offers a variety of fasteners for photovoltaic modules. The systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability, all at attractive prices. Schletter also offer a durability warranty of 10 years. Schletter systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability at attractive prices. All systems are produced exclusively in Kirchdorf/Haag in Upper Bavaria. Other Parts One of the following WindSheet SLT-169019-170 FixZ-15 Windsafe18 to 1700mm for 60 cell modules

Rail connector for Eco05 profile rails. For higher load inclined or A-frame type systems. E Eco connector, pre-assembled. If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: 129001-003 Weight: 0.15 kg An experienced manufacturer of professional solar mounting systems, Schletter offers a variety of fasteners for photovoltaic modules. The systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability, all at attractive prices. Schletter also offer a durability warranty of 10 years. Schletter systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability at attractive prices. All systems are produced exclusively in Kirchdorf/Haag in Upper Bavaria.

Rail connector for Eco05 profile rails. The easier and cleaner solution for joining Eco rails. Keywords: 129001-004, Schletter, PV Mounting This connecter includes the following: Connector section which is 250mm long‚ A  ‚ A  2 of the 5.5x25mm self-tapping screws per connection or splice are not included, please purchase seperately‚ A SLT-943755-925 On Special Offer! SLT-129001-014-KIT Connector plate Eco05 Internal Connector Kit - Including Screws If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: 129001-014 Weight: 0.06 kg PV Light: SLT1,R2+ An experienced manufacturer of professional solar mounting systems, Schletter offers a variety of fasteners for photovoltaic modules. The‚ A systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability, all at attractive prices. Schletter also‚ A offer a durability warranty of 25‚ A years.Schletter systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability at attractive prices.‚ A All systems are produced exclusively in Kirchdorf/Haag in Upper Bavaria. Other Parts are required ‚ A  SLT-943755-925 Self Drilling Screw 5.5 x 25 A2 - For Connectors Possible Alternatives SLT-129001-003 Connector E Eco pre-assembled

Rail connector for Eco05, Solo, Solo05, FixZ7, FixZ15 profile rails. Solo, SoloPlus connector FixZ-7, FixZ-15, pre-assembled Important Replaced by SLT-129060-000 for SA.Ersetzt durch SLT-129060-000 fƒ¼r SA. If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: 129002-002 Weight: 0.17 kg An experienced manufacturer of professional solar mounting systems, Schletter offers a variety of fasteners for photovoltaic modules. The systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability, all at attractive prices. Schletter also offer a durability warranty of 10 years. Schletter systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability at attractive prices. All systems are produced exclusively in Kirchdorf/Haag in Upper Bavaria. Possible Alternatives SLT-129060-000 Insertion connector Solo / Profile SLT-129002-002 Connector Solo5, Solo05 Light, ProfiPlus, FixZ-7 &FixZ-15 SLT-129060-000-KIT Insertion connector Solo / Profile Kit (Profile including screws)

Rapid16 The new clamp range‚ Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing ‚ The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height.‚ The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design. If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: 131101-003 Weight: 0.05 kg Clip Type: 199 Clip H: 40 mm Clip B1: 10 mm Clip Colour: Silver An experienced manufacturer of professional solar mounting systems, Schletter offers a variety of fasteners for photovoltaic modules. The systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability, all at attractive prices. Schletter also offer a durability warranty of 10 years. Schletter systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability at attractive prices. All systems are produced exclusively in Kirchdorf/Haag in Upper Bavaria. Possible Alternatives SLT-131101-001 End Clamp Rapid16 30-40mm Silver SLT-131121-901 Mid Clamp Rapid16 30-40mm Black

Rapid16 The new clamp range‚ Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height.‚ The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design. If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: 131101-901 Weight: 0.05 kg Clip Type: 199 Clip H: 40 mm Clip B1: 10 mm Clip Colour: Black An experienced manufacturer of professional solar mounting systems, Schletter offers a variety of fasteners for photovoltaic modules. The systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability, all at attractive prices. Schletter also offer a durability warranty of 10 years. Schletter systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability at attractive prices. All systems are produced exclusively in Kirchdorf/Haag in Upper Bavaria. Possible Alternatives SLT-131101-001 End Clamp Rapid16 30-40mm Silver

Rapid16 The new clamp range Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height. The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design. If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: 131101-001 Weight: 0.05 kg Clip Type: 199 Clip H: 40 mm Clip B1: 10 mm Clip Colour: Silver An experienced manufacturer of professional solar mounting systems, Schletter offers a variety of fasteners for photovoltaic modules. The systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability, all at attractive prices. Schletter also offer a durability warranty of 10 years. Schletter systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability at attractive prices. All systems are produced exclusively in Kirchdorf/Haag in Upper Bavaria. Possible Alternatives SLT-131101-901 End Clamp Rapid16 30-40mm Black

Rapid16 The new clamp range‚ Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height.‚ The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design. If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: 131101-902 Weight: 0.055 kg Clip Type: 199 Clip H: 50 mm Clip B1: 10 mm Clip Colour: Black An experienced manufacturer of professional solar mounting systems, Schletter offers a variety of fasteners for photovoltaic modules. The systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability, all at attractive prices. Schletter also offer a durability warranty of 10 years. Schletter systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability at attractive prices. All systems are produced exclusively in Kirchdorf/Haag in Upper Bavaria. Possible Alternatives SLT-131101-002 End Clamp Rapid16 40-50mm Silver

Rapid16 The new clamp range‚ Fewer variants for all applications Integrated grounding pin Quick mounting Optimised warehousing The Schletter module clamp range Rapid16 provides a lot of advantages, such as better warehousing due to the minimised number of design variants and the grounding pin integrated in each module clamp. The Rapid16 clamps are compatible with all Schletter module-bearing rails with 8 mm click channel, designed for module frames of 30 - 50 mm height.‚ The clamping range is divided in 2 sizes. The lower module clamps can fasten modules with frame heights of 30 - 40 mm. The higher clamps are suitable for frames of 40 - 50 mm height. For all middle clamps and for the higher end clamps, the click-in component can be rotated and therefore fasten the modules both in portrait (vertically) and in landscape (horizontally) (linear module clamping). This, however, is not possible with end clamps for lower module frames, as there the click-in component cannot rotate due to its geometry. This is why we provide the lower end clamp also in "H" (horizontal) design. If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: 131101-002 Weight: 0.055 kg Clip Type: 199 Clip H: 50 mm Clip B1: 10 mm Clip Colour: Silver An experienced manufacturer of professional solar mounting systems, Schletter offers a variety of fasteners for photovoltaic modules. The systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability, all at attractive prices. Schletter also offer a durability warranty of 10 years. Schletter systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability at attractive prices. All systems are produced exclusively in Kirchdorf/Haag in Upper Bavaria. Possible Alternatives SLT-131101-902 End Clamp Rapid16 40-50mm Black

FixGrid FixZ-15 center system rail 96mm with connector fixgrid ‚ If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: 163900-003 Weight: 0.545 kg An experienced manufacturer of professional solar mounting systems, Schletter offers a variety of fasteners for photovoltaic modules. The systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability, all at attractive prices. Schletter also offer a durability warranty of 10 years. Schletter systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability at attractive prices. All systems are produced exclusively in Kirchdorf/Haag in Upper Bavaria. Possible Alternatives SLT-163900-003 FixGrid FixZ-15 center system rail 96mm with connector

FixGrid FixZ-15 lower system rail 96mm with connector fixgrid ‚ If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: 163900-002 Weight: 0.129 kg An experienced manufacturer of professional solar mounting systems, Schletter offers a variety of fasteners for photovoltaic modules. The systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability, all at attractive prices. Schletter also offer a durability warranty of 10 years. Schletter systems combine optimum structural dimensioning, short mounting times, economic efficiency and maximum durability at attractive prices. All systems are produced exclusively in Kirchdorf/Haag in Upper Bavaria. Possible Alternatives SLT-163900-012 FixGrid FixZ-7 lower system rail 96mm with connector