Products

The All New Solis Mini S6 Series Grid-tie Inverter. Compact and lightweight design, for easy installation. Fanless, minimal noise, producing less than 20 dBA. Compatible with high-efficiency modules and bi-facial modules. Product Features Super high frequency switching technology with maximum efficiency of‚ 96.6% Max PV Power of 1.1kW DRM (Demand Response Mode) integrated and backflow power control function‚ for smart grid requirements. Wide voltage range - Ultra low start-up voltage of 60V and max PV input voltage of 600V Intergrated Export Power Manager (EPM) Integrated AFCI (DC arc-fault circuit protection) Integrated DC switch for emergency shut-down of PV power or safe PV maintenance 5-year‚ standard warranty ( 10-year standard warranty for the Netherlands, Belgium, France, Germany, Poland, Italy ) Note: This inverter can be reduced in power with the agreement of the energy supplier in order to comply with possible regulations of a balcony power plant in your country. For this purpose, the document "Manufacturer‚ Power Limit Declaration" issued by Solis (filed under Documentation) must be completed and sent to that energy supplier. In addition, please note that the inverter is connected with at least 2.5 mm‚ in the distribution. Please refer to the corresponding manual when setting up the inverter. If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: S6-GR1P0.7K-M-DC Weight: 7.4 kg Rated Power: 700 W Min PPT Voltage: 60 V Max PPT Voltage: 500 V DC Startup Voltage: 60 V DC Shutdown Voltage: 50 V Max Input Voltage: 600 V Max DC Power: 1,100 W Max AC Power (5 Minutes): 770 W Surge AC Power (1 Second): 770 W Max DC Current: 14 A Max DC Inputs: 1 Has DC Fuses: 0 Connector: MC4 Included Connectors: 1 Euro Efficiency: 95.3 % Transformer: None MPPT Quantity : 1 Has Integrated DC Switch: Yes Warranty: 5 years Designed by world leading research and development team made by professors and specialists from 8 countries, Solis inverters are praised by clients and customs all over the world due to the high quality and reliability with the feature of ultra wide input voltage, precise MPPT algorithm, and Max. efficiency over 97%, which made Ginlong brand one of the most performance-cost inverters in the world. Use our quick configurator tool to identify possible panel and inverter configurations: Quick Config Optional other parts One of the followingWarranty Extension SOL-WAR-20Y-MINI 0.7kW Mini S6 Single Tracker with DC isolator SOL-WAR-10Y-MINI 0.7kW Mini S6 Single Tracker with DC isolator SOL-WAR-10Y-S6-MINI 0.7kW Mini S6 Single Tracker with DC isolator One of the followingWarranty Extension SOL-WAR-10Y-MINI-4G 0.7kW Mini S6 Single Tracker with DC isolator Possible Alternatives SOL-3.0-MINI-S6-DC S6 Mini 3kW 1MPPT 1PH Inverter - with DC isolator

Note: SOL-0.7-MINI-S6-EU-DC Without Export Limitation Function.‚ The All New Solis Mini S6 Series Grid-tie Inverter. Compact and lightweight design, for easy installation. Fanless, minimal noise, producing less than 20 dBA. Compatible with high-efficiency modules and bi-facial modules. Product Features Super high frequency switching technology with maximum efficiency of‚ 96.6% Max PV Power of 1.1kW DRM (Demand Response Mode) integrated and backflow power control function‚ for smart grid requirements. Wide voltage range - Ultra low start-up voltage of 60V and max PV input voltage of 600V Intergrated Export Power Manager (EPM) Integrated AFCI (DC arc-fault circuit protection) Integrated DC switch for emergency shut-down of PV power or safe PV maintenance 5-year‚ standard warranty Note: This inverter can be reduced in power with the agreement of the energy supplier in order to comply with possible regulations of a balcony power plant in your country. For this purpose, the document "Manufacturer‚ Power Limit Declaration" issued by Solis (filed under Documentation) must be completed and sent to that energy supplier. In addition, please note that the inverter is connected with at least 2.5 mm‚ in the distribution. Please refer to the corresponding manual when setting up the inverter. If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: S6-GR1P0.7K-M Rated Power: 700 W Min PPT Voltage: 60 V Max PPT Voltage: 500 V DC Startup Voltage: 60 V DC Shutdown Voltage: 50 V Max Input Voltage: 600 V Max DC Power: 1,100 W Max AC Power (5 Minutes): 770 W Surge AC Power (1 Second): 770 W Max DC Current: 14 A Max DC Inputs: 1 Has DC Fuses: 0 Connector: MC4 Included Connectors: 1 Euro Efficiency: 95.3 % Transformer: None MPPT Quantity : 1 Has Integrated DC Switch: Yes Warranty: 5 years Designed by world leading research and development team made by professors and specialists from 8 countries, Solis inverters are praised by clients and customs all over the world due to the high quality and reliability with the feature of ultra wide input voltage, precise MPPT algorithm, and Max. efficiency over 97%, which made Ginlong brand one of the most performance-cost inverters in the world. Use our quick configurator tool to identify possible panel and inverter configurations: Quick Config Optional other parts One of the followingWarranty Extension SOL-WAR-10Y-S6-MINI 0.7kW Mini S6 Single Tracker with DC isolator (No Export Limitation) SOL-WAR-10Y-MINI 0.7kW Mini S6 Single Tracker with DC isolator (No Export Limitation) SOL-WAR-20Y-MINI 0.7kW Mini S6 Single Tracker with DC isolator (No Export Limitation) One of the followingWarranty Extension SOL-WAR-10Y-MINI-4G 0.7kW Mini S6 Single Tracker with DC isolator (No Export Limitation) Possible Alternatives SOL-3.0-MINI-S6-DC S6 Mini 3kW 1MPPT 1PH Inverter - with DC isolator

This part is a special offer made up of the following items: Part ‚ 3 x SE-BATTERY-4.6KWH-02 SolarEdge Home Battery 48V V2 - 3PH Low Voltage 4.6kWh module ‚ 1 x SE-10000-3PH-RWB SolarEdge 10,000W Home Hub 48V - Three Phase with Backup Potential ‚ 1 x SE-WND-3Y400-MB-K2 1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection ‚ 1 x SE-CABLE-B2I-4.6 SolarEdge Battery to Inverter Cable Set for Home Hub 3ph, SE*K-RWB48 ‚ 3 x SE-CT-SPL-100A-A 100A Split-Core Current Transformer for SolarEdge Energy Meters with Modbus Connection ‚ 2 x SE-CABLE-B2B-4.6 SolarEdge Battery to Battery Cable Set for Home Battery 48V ‚ 1 x SE-BATT-CVR-KIT-4.6 SolarEdge Battery Top Cover for Home Battery 48V ‚ 1 x SE-WIFI-ANTENNA SolarEdge WiFi and ZigBee Antenna single (SetAPP ) ‚ SolarEdge 3PH HOME Hub w.Backup Potential Package- 10kW 3PH Hybrid RWB + 3 x 4.6kWh (13.8kWh) Doesn't include the SolarEdge Backup Interface.‚ SE-SBI-3PH Optional Related Product:‚ Floor-Stand for SolarEdge Home Battery 400V 10kWh Battery In this package we have included 3x 100A CT's. This may not be the appropriate CT for the installation site. Please refer to these CT alternatives if this is the case. If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Weight: 203.78 kg Providers of distributed solar power harvesting and PV monitoring systems. SolarEdge maximises power generation of residential and large scale PV systems for faster return on investment. Optional other parts to consider SE-SBI-3PH 10,000W Home Hub Inverter with Backup Potential Package 3PH: 3x 4.6kWh (13.8kWh) Home Battery

This part is a special offer made up of the following items: Part ‚ 4 x SE-BATTERY-4.6KWH-02 SolarEdge Home Battery 48V V2 - 3PH Low Voltage 4.6kWh module ‚ 1 x SE-10000-3PH-RWB SolarEdge 10,000W Home Hub 48V - Three Phase with Backup Potential ‚ 1 x SE-WND-3Y400-MB-K2 1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection ‚ 1 x SE-CABLE-B2I-4.6 SolarEdge Battery to Inverter Cable Set for Home Hub 3ph, SE*K-RWB48 ‚ 1 x SE-CABLE-T2T-4.6 SolarEdge Tower to Tower Cable Set for Home Battery 48V ‚ 3 x SE-CT-SPL-100A-A 100A Split-Core Current Transformer for SolarEdge Energy Meters with Modbus Connection ‚ 2 x SE-BATT-CVR-KIT-4.6 SolarEdge Battery Top Cover for Home Battery 48V ‚ 2 x SE-CABLE-B2B-4.6 SolarEdge Battery to Battery Cable Set for Home Battery 48V ‚ 1 x SE-WIFI-ANTENNA SolarEdge WiFi and ZigBee Antenna single (SetAPP ) ‚ SolarEdge 3PH HOME Hub w.Backup Potential Package- 10kW 3PH Hybrid RWB + 4 x 4.6kWh (18.4kWh) Doesn't include the SolarEdge Backup Interface.‚ SE-SBI-3PH Optional Related Product (1 Floorstand per Tower):‚ Floor-Stand for SolarEdge Home Battery 400V 10kWh Battery In this package we have included 3x 100A CT's. This may not be the appropriate CT for the installation site.‚ Please refer to these CT alternatives if this is the case. If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Weight: 260.98 kg Providers of distributed solar power harvesting and PV monitoring systems. SolarEdge maximises power generation of residential and large scale PV systems for faster return on investment. Optional other parts to consider SE-SBI-3PH 10,000W Home Hub Inverter with Backup Potential Package 3PH: 4x 4.6kWh (18.4kWh) Home Battery

SolarEdge Home Wave Inverter- Network Ready Optimized installation with HD-Wave technology Features: Specifically‚ designed to work with SolarEdge Power Optimizers Quick and easy inverter commissioning directly from a smartphone using the SolarEdge SetApp Industry leading efficiency with 200% DC oversizing Seamless wireless connectivity with system devices such as the SolarEdge Home Battery, via optional SolarEdge Home Network platform Extremely compact, lightweight and easy to install Built-in module-level monitoring Suitable for outdoor and indoor installation Fixed voltage inverter for longer strings SolarEdge 8kW and 10kW single phase inverters are now compatible with the SolarEdge Energy bank battery On Special Offer! SE-10000H-NET-DT 10,000W Home Wave Inverter - Single Phase (Design Tool) If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: SE10000H-RW000BEN4 Weight: 16.5 kg Rated Power: 10,000 W Min PPT Voltage: 184 V Max PPT Voltage: 265 V DC Startup Voltage: 0 V DC Shutdown Voltage: 480 V Max Input Voltage: 480 V Max DC Power: 20,000 W Max AC Power (5 Minutes): 10,000 W Surge AC Power (1 Second): 10,001 W Max DC Current: 25.5 A Max DC Inputs: 3 Has DC Fuses: 0 Connector: MC4 Included Connectors: 3 Euro Efficiency: 99 % Transformer: None MPPT Quantity : 0 Has Integrated DC Switch: Yes Warranty: 12 years Providers of distributed solar power harvesting and PV monitoring systems. SolarEdge maximises power generation of residential and large scale PV systems for faster return on investment. Use our quick configurator tool to identify possible panel and inverter configurations: Quick Config Not required parts SE1000-RS485-IF01 SolarEdge RS485 Plug-in SetAPP inverters are not compatible with non-SetAPP accessories. SE-1000-WIFI01 SolarEdge Wifi Plug-in SetAPP inverters are not compatible with non-SetAPP accessories. Optional other parts to consider SE-ZBSLV-B-S1-RW 10,000W Home Wave Inverter - Single Phase Optional ZigBee Adaptor to allow for wireless internet connection. SE-WIFI-ANTENNA 10,000W Home Wave Inverter - Single Phase Optional Wifi Antenna to allow for wireless internet connection. One of the followingWarranty Extension SE-WAR-25Y-HD-8-10KW 10,000W Home Wave Inverter - Single Phase SE-WAR-20Y-HD-8-10KW 10,000W Home Wave Inverter - Single Phase Possible Alternatives SE-8000H-NET 8,000W Home Wave Inverter - Single Phase

This part is made up of the following items: 1 x SE-10000H-NET 10,000W Home Wave Inverter - Single Phase ‚ SolarEdge Home Wave Inverter- Network Ready Optimized installation with HD-Wave technology Features: Specifically‚ designed to work with SolarEdge Power Optimizers Quick and easy inverter commissioning directly from a smartphone using the SolarEdge SetApp Industry leading efficiency with 200% DC oversizing Seamless wireless connectivity with system devices such as the SolarEdge Home Battery, via optional SolarEdge Home Network platform Extremely compact, lightweight and easy to install Built-in module-level monitoring Suitable for outdoor and indoor installation Fixed voltage inverter for longer strings SolarEdge 8kW and 10kW single phase inverters are now compatible with the SolarEdge Energy bank battery If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Weight: 16.5 kg Rated Power: 10,000 W Min PPT Voltage: 400 V Max PPT Voltage: 480 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 480 V Max DC Power: 20,000 W Max AC Power (5 Minutes): 10,000 W Surge AC Power (1 Second): 10,001 W Max DC Current: 25.5 A Max DC Inputs: 3 Has DC Fuses: 0 Connector: MC4 Included Connectors: 3 Euro Efficiency: 99 % Transformer: None MPPT Quantity : 3 Has Integrated DC Switch: Yes Warranty: 12 years Providers of distributed solar power harvesting and PV monitoring systems. SolarEdge maximises power generation of residential and large scale PV systems for faster return on investment. Not required parts SE1000-RS485-IF01 SolarEdge RS485 Plug-in SetAPP inverters are not compatible with non-SetAPP accessories. SE-1000-WIFI01 SolarEdge Wifi Plug-in SetAPP inverters are not compatible with non-SetAPP accessories. Optional other parts to consider SE-WIFI-ANTENNA 10,000W Home Wave Inverter - Single Phase (Design Tool) Optional Wifi Antenna to allow for wireless internet connection. SE-ZBSLV-B-S1-RW 10,000W Home Wave Inverter - Single Phase (Design Tool) Optional ZigBee Adaptor to allow for wireless internet connection. One of the followingWarranty Extension SE-WAR-20Y-HD-8-10KW 10,000W Home Wave Inverter - Single Phase (Design Tool) SE-WAR-25Y-HD-8-10KW 10,000W Home Wave Inverter - Single Phase (Design Tool) Possible Alternatives SE-8000H-NET 8,000W Home Wave Inverter - Single Phase

48V StorEdge Three Phase Inverter SE5K-RWS / SE7K-RWS / SE8K-RWS / SE10K-RWS 3Phase PV Hybrid inverter, ideal solution for three phase installations with Low Voltage 48V Li-Ion batteries. Quick and easy inverter commissioning directly from a smartphone using the SolarEdge SetApp. Important Please note that unlike standard 1phase Solar Edge StorEdge devices, this 3phase inverter only works with Low Voltage 48V batteries! If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: SE10K-RWS48BEN4 Weight: 34.5 kg Rated Power: 10,000 W Min PPT Voltage: 750 V Max PPT Voltage: 900 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 900 V Max DC Power: 13,500 W Max AC Power (5 Minutes): 10,001 W Surge AC Power (1 Second): 13,500 W Max DC Current: 16.5 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4 Included Connectors: 4 Euro Efficiency: 97.6 % Transformer: None MPPT Quantity : 0 Has Integrated DC Switch: Yes Warranty: 12 years Providers of distributed solar power harvesting and PV monitoring systems. SolarEdge maximises power generation of residential and large scale PV systems for faster return on investment. Other Parts are required IAC-RBAT-5KCINV-02 SolarEdge Cable set 48V Home battery to StorEdge for 3PH SE*K-RWS One of the following Energy Meter SE-WND-3Y400-MB-K2 1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection Not required parts SE1000-RS485-IF01 SolarEdge RS485 Plug-in SetAPP inverters are not compatible with non-SetAPP accessories. SE-1000-WIFI01 SolarEdge Wifi Plug-in SetAPP inverters are not compatible with non-SetAPP accessories. Optional other parts to consider SE-WIFI-ANTENNA 10,000W StorEdge Hybrid Inverter 48V - Three Phase Optional Wifi Antenna to allow for wireless internet connection. SE-ZBSLV-B-S1-RW 10,000W StorEdge Hybrid Inverter 48V - Three Phase Optional ZigBee Adaptor to allow for wireless internet connection. One of the followingWarranty Extension SE-WAR-20YR-3PH-STOREDGE-5-10KW 10,000W StorEdge Hybrid Inverter 48V - Three Phase Possible Alternatives SE-5000-3PH-RWS 5,000W StorEdge Hybrid Inverter 48V - Three Phase SE-8000-3PH-RWS 8,000W StorEdge Hybrid Inverter 48V - Three Phase

This part is made up of the following items: 3 x GIV-BAT-3.4-HV GivEnergy 3.4kWh High Voltage Li-Ion Battery ‚ 1 x GIV-BAT-HV-BMU High Voltage Battery BMU Top and Bottom Section of Battery Housing ‚ Supplier Code: GIV-BAT-10.2-HV Battery Type: Lithium iron phosphate (LFP) Capacity: 10.2 kWh Nominal Voltage: 230 V DC Operating Voltage Range: 200-600 V Warranty: 12 years‚ Technical Specification Max Charge/Discharge Current: 25/25 A‚ Depth of Discharge (DoD): 100 % Life cycles: Unlimited within the 12 year warranty C Rating: 0.5C Required Accessories: No other accessories needed besides the BMS Communication: CAN BUS Compatibility: Inverter connection for 3PH Hybrid (GIV Hybrid Inverter only) If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Weight: 121.55 kg Rated Power: 10,200 W Battery Type: Lithium Ion Nominal Energy: 10200 Wh Depth of discharge: 100.00 % Voltage: 230 V Continuous Discharge Rate (Normal Use): 6550 W Maximum Discharge Rate (5 Minutes): 6550 W Surge Discharge Rate (15 Seconds): 6550 W Maximum Charge Rate (5 Minutes): 6550 W

This‚ split-core current transformer offers outstanding accuracy and one-handed operation and‚ is only for use in‚ Indoor‚ environments. The Sensor supports the following measurements:‚ AC Current Amps (A). Note:‚ This sensor is only for use with the SolarEdge Electricity Meter‚ 1PH/3PH 230/400V‚ SolarEdge Modbus Meter 1 second ‚ Supplier part code:‚ SECT-SPL-1000A-A ‚ If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: SECT-SPL-1000A-A Weight: 0.688 kg Providers of distributed solar power harvesting and PV monitoring systems. SolarEdge maximises power generation of residential and large scale PV systems for faster return on investment. Other Parts are required SE-WND-3Y400-MB-K2 1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection

Split-core current transformer (CT), accuracy +/- 1%. For use with Envoy-S Metered and 3phase Envoy-S Metered‚ If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: SPLIT-ROW Weight: 1 kg Enphase Energy, founded in 2006 in California, is the world leader in micro inverter technology with more than 13 million units sold worldwide and over 500,000 installed systems representing over 3GW of clean energy.

This‚ split-core current transformer offers outstanding accuracy and one-handed operation and‚ is only for use in‚ Indoor‚ environments. The Sensor supports the following measurements:‚ AC Current Amps (A). Note:‚ This sensor is only for use with the SolarEdge Electricity Meter‚ 1PH/3PH 230/400V‚ SolarEdge Modbus Meter 1 second SolarEdge have improved the design of their 100A and 250A Split-Core CTs to reduce the size and improve installation experience. The new 100A CT SECT-SPL-100A-A is a 1:1 replacement for the previous 50A and 70A CTs. Thus, one CT will cover the full range from 50A to 100A installations, instead of 3 different CT products required until now. On Special Offer! SE-10000H-3PH-BAT4.6-RWB-3 10,000W Home Hub Inverter with Backup Potential Package 3PH: 3x 4.6kWh (13.8kWh) Home Battery SE-10000H-3PH-BAT4.6-RWB-4 10,000W Home Hub Inverter with Backup Potential Package 3PH: 4x 4.6kWh (18.4kWh) Home Battery SE-10000H-3PH-BAT4.6-RWB-5 10,000W Home Hub Inverter with Backup Potential Package 3PH: 5x 4.6kWh (23kWh) Home Battery SE-5000H-3PH-BAT4.6-RWB-3 5,000W Home Hub Inverter with Backup Potential Package 3PH: 3x 4.6kWh (13.8kWh) Home Battery SE-5000H-3PH-BAT4.6-RWB-4 5,000W Home Hub Inverter with Backup Potential Package 3PH: 4x 4.6kWh (18.4kWh) Home Battery SE-5000H-3PH-BAT4.6-RWB-5 5,000W Home Hub Inverter with Backup Potential Package 3PH: 5x 4.6kWh (23kWh) Home Battery SE-8000H-3PH-BAT4.6-RWB-3 8,000W Home Hub Inverter with Backup Potential Package 3PH: 3x 4.6kWh (13.8kWh) Home Battery SE-8000H-3PH-BAT4.6-RWB-4 8,000W Home Hub Inverter with Backup Potential Package 3PH: 4x 4.6kWh (18.4kWh) Home Battery SE-8000H-3PH-BAT4.6-RWB-5 8,000W Home Hub Inverter with Backup Potential Package 3PH: 5x 4.6kWh (23kWh) Home Battery SE-BATTERY02-10KWH-PACK SolarEdge Home Battery V2 10kWh 1ph package SE-BATTERY-10KWH-PACK SolarEdge Home Battery 10kWh 1ph Retrofit package SE-PM-WND-1PH-100A SolarEdge Power Management package <100A grid supply SE-SEDGE3PH-8-RESU6.5-WG StorEdge 8000W Three Phase Hybrid Inverter with LG Chem RESU6.5kWh Battery If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: SECT-SPL-100A-A Weight: 0.24 kg Providers of distributed solar power harvesting and PV monitoring systems. SolarEdge maximises power generation of residential and large scale PV systems for faster return on investment. Other Parts are required SE-WND-3Y400-MB-K2 1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection

Solar Edge Synergy Manager: Contains communication board, AC and DC connection: no need to open the inverter units during installation. Reduced BoS with support for single DC input and cost-effective aluminium cables Separation of AC and DC connections Dimensions of Synergy Manager (H x W x D):‚ 360 x 560 x 295mm Weight of Synergy Manager: 18kg Warning: Solar Edge Synergy Manager can not be used on its own, it always requires Synergy Units to work, 2x for 50kW and 66.6kW and 3x for 90kW and 100kW. On Special Offer! SE-100000-BASE-FULL 100kW Synergy Manager BASE No DC Switch, MC4, DC SPD If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: SE100K-RW00IBNM4 Weight: 22 kg Providers of distributed solar power harvesting and PV monitoring systems. SolarEdge maximises power generation of residential and large scale PV systems for faster return on investment. Other Parts One of the following Synergy Unit SE-SYNERGY Synergy Secondary Unit without RapidShutdownDevice SE-SYNERGY-RSD Synergy Secondary Unit with RapidShutdownDevice Optional other parts One of the followingWarranty Extension SE-WAR-20Y-MNGR-80-100K 100kW Synergy Manager BASE No DC Switch, MC4, DC SPD

Solar Edge Synergy Manager: Contains communication board, AC and DC connection: no need to open the inverter units during installation. Reduced BoS with support for single DC input and cost-effective aluminium cables Separation of AC and DC connections Dimensions of Synergy Manager (H x W x D):‚ 360 x 560 x 295mm Weight of Synergy Manager: 18kg 25Amp fuse is NOT compatible with the S1200 optimisers. 30Amp fuse (per phase) replacement is required for this inverter to work with the S1200 optimiser.‚ ‚ Warning: Solar Edge Synergy Manager can not be used on its own, it always requires Synergy Units to work, 2x for 50kW and 66.6kW and 3x for 90kW and 100kW. On Special Offer! SE-100000-FUSE-FULL 100kW Synergy Manager FUSE DC Switch, MC4, DC SPD, Fuses If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: SE100K-RW00IBNC4 Weight: 18 kg Providers of distributed solar power harvesting and PV monitoring systems. SolarEdge maximises power generation of residential and large scale PV systems for faster return on investment. Other Parts One of the following Synergy Unit SE-SYNERGY Synergy Secondary Unit without RapidShutdownDevice SE-SYNERGY-RSD Synergy Secondary Unit with RapidShutdownDevice Optional other parts One of the followingWarranty Extension SE-WAR-20Y-MNGR-80-100K 100kW Synergy Manager FUSE DC Switch, MC4, DC SPD, 25A Fuses

Solar Edge Synergy Manager - 30Amp for S1200 Optimisers: Contains communication board, AC and DC connection: no need to open the inverter units during installation. Reduced BoS with support for single DC input and cost-effective aluminium cables Separation of AC and DC connections Dimensions of Synergy Manager (H x W x D):‚ 360 x 560 x 295mm Weight of Synergy Manager: 18kg Warning: Solar Edge Synergy Manager can not be used on its own, it always requires Synergy Units to work, 2x for 50kW and 66.6kW and 3x for 90kW and 100kW. If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: SE100K-RW00IBNE4 Weight: 18 kg Providers of distributed solar power harvesting and PV monitoring systems. SolarEdge maximises power generation of residential and large scale PV systems for faster return on investment. Other Parts One of the following Synergy Unit SE-SYNERGY Synergy Secondary Unit without RapidShutdownDevice SE-SYNERGY-RSD Synergy Secondary Unit with RapidShutdownDevice Optional other parts One of the followingWarranty Extension SE-WAR-20Y-MNGR-80-100K 100kW Synergy Manager FUSE DC Switch, MC4, DC SPD, 30A Fuses