Display and Power Management

The Solis Wi-Fi stick is a very clever, simple, external plug-in device, which is fully universal across the Solis inverter range. The S3 Wi-Fi Stick is faster, more responsive, and has an all-round better build quality. This 3rd Gen device includes 3 external LEDs to confirm connection status as well as a reset button on the outside Connect to up to 10 inverters with one S3 datalogger‚ Quick Installation which only requires the installer to have a smartphone/laptop to hand; the only customer requirement is a WIFI network within range of the inverter. The unit provides a simple to install monitoring solution for end customers with access to web, iPhone, and Android app monitoring.‚ In addition to free access to the monitoring website there is also an installer level login so the installer can view all their Solis inverters installed in one place.‚ The unit provides a user friendly, easily accessible solution to inverter monitoring.‚ Keywords: SOLDLSW, Display, Web Interface If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: S3-WIFI-ST Weight: 0.15 kg Designed by world leading research and development team made by professors and specialists from 8 countries, Solis inverters are praised by clients and customs all over the world due to the high quality and reliability with the feature of ultra wide input voltage, precise MPPT algorithm, and Max. efficiency over 97%, which made Ginlong brand one of the most performance-cost inverters in the world. Possible Alternatives SOL-DLB-W Solis Data Logging Box - WiFi SOL-S2-WL-ST Solis Data Logging Stick - Wi-Fi &LAN 4-Pin

PEAS69-EL Enclosure AC Isolator 25A Special silver alloy contact, long electrical life, high reliability Small size, save installation space It has a structure to protect the fingers and operate safely Seal switch box type IP66 protection level Products through CE, TUV certification ‚ If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: PEAS69-EL25R-3 Weight: 0.4 kg Rated Power: 5,750 W Poles: 3 Max Cable: 10 mm 2 Max Voltage: 240 V Rated Current: 25 A Rated Voltage: 230 V Possible Alternatives PEAS69-EL32R-4 Projoy AC Isolator 32A 4pole

Please note the the manufacturer is changing the design of this product.‚  Functionality will remain the same so please don't be alarmed if the product you receive looks slightly different to the one pictured If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: ART100633 Weight: 0.006 kg GSE Integration is an easy mounting solution for creating an in roof array. GSE is itself, a programme to develop mounting and integration systems by SVH Energie. GSE are motivated by the essential need to provide customers with the most innovative and suitable products. The GSE IN-ROOF SYSTEM for photovoltaic integration has now captured over 60% market share of residential installations in France, and having crossed over to the UK, they are offering their easy and cost effective solution the likes of which the UK market has yet to experience. Possible Alternatives GSE-FLASHING-HOOK GSE Flashing Hook

Enhance your SolaX installation by connecting it to the SolaX Cloud. This WiFI dongle allows an wireless connection to be made to the Internet router. This is ideal when running a cable isn't possible. One dongle is needed per SolaX inverter.‚ If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: Wifi dongle For X1 inverters Weight: 0.105 kg

Pylon battery cable accessory kit for use between the US range of batteries and DC disconnecter switch. NOT FOR USE FOR‚  PARALLEL BATTERY CONNECTION. You require one cable pack per system up to a maximum of 100A supply charge/discharge. For Larger systems, two cable packs may be necessar, subject to the system current rating.‚ ‚ This cable pack includes the following solar cables: 2 x 2m long power cables (positive and negative), 2 comms cables for UK use, see note below in red.‚ ‚ NB SA only: -‚  Please note that this cable pack no longer comes with the communication cable. - The maximum cable pack a customer can purchase in a single order is 20 cable packs.‚ ‚ UK “ Cable pack includes 2 x comms cables.‚  For connection to a US type C variant battery to a Solis inverter, please use the comms cable with blue labelling from this pack ‚ ‚ ‚ ‚ ‚ ‚ ‚ Important Please check if you need to use the communications cable supplied with the inverter and not that supplied in the Pylon cable pack when connecting the inverter to Pylon batteries. On Special Offer! SOL-RHI-6-5G-PYLON-L2-14.21 Solis Hybrid 6kW-5G / Pylon L2 14.21kWh Package If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: BW02PCH23535102M Weight: 1.12 kg Length: 2 m Area: 25 mm 2 Colour: - Cores: 2 - N Max Current: 120 Max Voltage: 1000 Other Parts One of the following Pylon Battery PYLON-US3000C Pylon US3000C 3.5kWh Li-Ion Solar Battery (excl. brackets) PYL-PC-H2-BATT Pylon PowerCube H2, 3.552kWh, 48V 74Ah for High Voltage series connection(H48074) Possible Alternatives CAB-PK-PYLON-3.5 Cable Pack for Pylontech Solar Batteries 3.5m

GivEnergy Smart Plug‚ Smart plugs are‚ a simple way to automate wired devices and make the home a bit smarter but GivEnergy™s smart plug is a little different as users can see exactly how much energy the connected devices are using. Controlled from anywhere using the GivEnergy app, home appliances whether smart or not can be easily managed remotely to cut waste as well as costs. Also, advanced routines and schedules can be set involving up to 300 smart plugs! And it works with Alexa. 16A Smart Plug with Energy Monitoring Power and Energy Breakdown WiFi Controlled Working Temp: -10 ~ 60‚°C WiFi Requirements:‚ 2.4 GHz Only Input Voltage:‚ 230V AC 50Hz - 60Hz Max Power: 3680W If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: GIV-SP-16-2.4-TC-01 Weight: 0.082 kg

100A fuse link to be used with the‚ Keto-00‚ disconnector switch. The Keto-00 requires two fuses.‚ On Special Offer! KETO-00-100A KETO Battery Disconnector with 100A Fuses PYL-L2-BMU-BASE-L10.65 Pylon Force-L2 Low Voltage System 10.65kWh PYL-L2-BMU-BASE-L14.20 Pylon Force-L2 Low Voltage System 14.2kWh PYL-L2-BMU-BASE-L7.10 Pylon Force-L2 Low Voltage System 7.10kWh If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: N5014307 Weight: 0.17 kg Other Parts are required KETO-00 Jean Muller Fuse-switch-disconnector KETO size 00 body (battery isolator) Possible Alternatives N5014907-160A NH Fuse-link 160A for KETO-00

PEAS69-EL Enclosure AC Isolator 32A Special silver alloy contact, long electrical life, high reliability Small size, save installation space It has a structure to protect the fingers and operate safely Seal switch box type IP66 protection level Products through CE, TUV certification ‚ On Special Offer! PEAS69-EL32R-4-1P Projoy AC Isolator 32A 4pole If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: PEAS69-EL32R-4 Weight: 0.4 kg Rated Power: 7,360 W Poles: 4 Max Cable: 10 mm 2 Max Voltage: 240 V Rated Current: 32 A Rated Voltage: 230 V Possible Alternatives PEAS69-EL25R-3 Projoy AC Isolator 25A 3pole

Product Feature: Higher output power (405W). Lower levelized cost of energy (LCOE). Better shading tolerance. Enhanced tolerance for mechanical loading. 12-year product warranty and 25-year linear power output warranty. Comes supplied with staubli MC4 connectors. SPG Renewables Solar is an authorized reseller for JA Solar, please refer to the letter in the document section. Due to size of the panels and‚ size of the gap between the slats of the pallets (both length and width entries) a fork lift truck on site is required to offload these modules. In Germany, this module may only be installed on building-independent solar systems in publicly inaccessible areas with a height of up to 3m. This product must be installed by a qualified electrician/technician. All installations must adhere to local wiring regulations and standards. SPG Renewables will not be held liable for any product malfunctions as a result of incorrectly installed systems. If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: JAM54S31-405/MR Weight: 19 kg Length: 1.72 m Rated Power: 405 W MCS Reference: BABT 8515-240-405W Length: 1,722 mm Width: 1,134 mm Depth: 30 mm VMPP: 31.21 V IMPP: 12.98 A Isc: 13.87 A Voc: 37.23 V Temp. Coefficient (Mpp): -0.35 % Clamp position on panel: Long and short side Connector Type: MC4 Efficiency: 20.7 % Pallet Size: Oversized Use our quick configurator tool to identify possible panel and inverter configurations: Quick Config Compatible Micro-Inverters EN-IQ7PLUS-72-M-INT Enphase IQ7 Plus 60 and 72 cell MC4 integrated Microinverter 230 &400VAC. EN-IQ8AC-72-M-INT Enphase IQ8AC 54 to 72 cell Microinverter 366 VA peak power MC4 EN-IQ8AC-72-M-INT-3PH Enphase IQ8AC 54 to 72 cell Microinverter 366 VA peak power MC4 EN-IQ8HC-72-M-INT Enphase IQ8HC 54 and 72 cell Microinverter 384 VA peak power MC4 Possible Alternatives JAM60S-21-370-MR-AB-MC4-SM JA Solar 370W Mono MBB Percium Half-Cell All Black Short Frame MC4 REC405TP5-AB REC TwinPeak 5 Series 405W All Black JAM54S-31-400-MR-AB JA Solar 400W Mono PERC Half-Cell MBB All Black Short Frame MC4 JAM54S-31-410-GR-AB JA Solar 410W Mono PERC Half-Cell MBB All Black Short Frame MC4 Compatible Optimisers P850-2.2-LI-1.3-MC4 P850 Optimiser 850W MC4 2x High Power/Bi-facial 2.2m with 1.3m input length P850-2.2-MC4 P850 Optimiser 850W MC4 2x High Power/Bi-facial 2.2m P950-2.2-1.3-MC4 P950 Optimizer 950W MC4 2 x high power or bi-facial modules with 1.3m input length P950-2.2-MC4 P950 Optimizer 950W MC4 2 x high power or bi-facial modules S1000-LI-MC4 S1000 Power Optimizer Long Input (1.3m) S1000-MC4 S1000 Power Optimizer S1200-LI-MC4 SolarEdge S1200 Commercial Power Optimizer S1200-MC4 S1200 Power Optimizer S1400-MC4 S1400 Power Optimizer S440-MC4 Solar Edge S440 Power Optimizer S500-MC4 Solar Edge S500 Power Optimizer P505-MC4 SolarEdge P505 Optimiser MC4 High Current for Bi-Facial TS4-A-O Tigo TS4 PV Module Advanced Add-On/Retrofit P750-MC4 SolarEdge P750 Optimiser MC4 High Current for Bi-Facial SUN2000-450W-P2 Huawei SUN2000 450W Smart PV Optimizer SUN2000-600W-P Huawei SUN2000 600W Smart PV Optimizer

GivEnergy 9.5 kWh Eco Li-Ion Battery State-of-the-Art Management System‚ Utilising lithium iron phosphate, GivEnergy batteries are extremely safe and can be installed in a wide range of locations. Their market-leading battery warranty means you can use your battery as much as you want for 12 years and still be covered. Features:‚ Plug &Play functionality Fully Recyclable at end of life Remote Firmware upgrades IP65 Rated 12‚ Year warranty Technical: Dual BMS system allowing greater control and functionality Scalable Battery Packs - Up to 5 per inverter in 2019 0.5C-1C charge and discharge rate Retrofit compatible 157Wh per Kg +/- 5% Depth of Discharge‚ 100% NOTICE: When connecting Gen 1 and Gen 2 GivEnergy products together, for example a Gen 1 hybrid inverter with a Gen 2 9.5 battery, you must use a G1 to G2 cable; GIV-BAT-CAB-G1-G2 . This would also be required if you connect a Gen 2 9.5 battery to a Gen 1 8.2 battery. ‚ If you are connecting Gen 2 products together, such as a Gen 2 hybrid and a Gen 2 9.5 battery, you must use a G2 to G2 cable; GIV-BAT-CAB-G2-G2 ‚ Please note: Givenergy online portal login is required to fully commission this system. If You do not already have a login, please contact‚ GivEnergy ‚ before‚ going to site to install! You need to attend GivEnergy Installers Training in order to install this product. Please check with‚ GivEnergy ‚ for details. ‚ ‚ If fitted by non-trained installer the Warranty will be VOID! On Special Offer! GIV-3.6K-9.5-G3 GivEnergy Gen3 - 3.6kW Hybrid with 9.5kWh Battery Package (9.5kWh) GIV-5.0K-9.5-G3 GivEnergy Gen3 - 5.0kW Hybrid with 9.5kWh Battery Package (9.5kWh) GIV-AC3.0-9.5 GivEnergy 3.0kW AC Coupled inverter with 9.5kWh Battery Package (9.5kWh) If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: GIV-BAT-9.5 Weight: 110 kg Battery Type: Lithium Ion Nominal Energy: 9500 Wh Depth of discharge: 100.00 % Voltage: 51 V Continuous Discharge Rate (Normal Use): 4096 W Maximum Discharge Rate (5 Minutes): 4096 W Surge Discharge Rate (15 Seconds): 4096 W Maximum Charge Rate (5 Minutes): 4096 W Possible Alternatives GIV-BAT5.2 GivEnergy 5.2kWh Li-Ion Battery

The P404-MC4 allows shorter string design with SolarEdge inverters, to a minimum of 6 modules per string and is ideally suited to standard 60 and 72 cell modules. This increased flexibility will allow smaller installations to be optimised for maximum energy output. Second generation optimisers from SolarEdge, pioneers of optimiser technology. ‚ In addition to the benefits of previous versions of the optimsers such as added energy, flexible design, module level monitoring and safety, the P Series range includes features including: Optimised for high-power modules Faster, simpler Installation requiring just a single screw Compliance with VDE-AR-E 2100-712 Fire Safety standard SolarEdge power optimisers maximise energy from each panel through constant tracking of Maximum Power Point per panel. ‚ Optimal efficiency is achieved by automatically maintaining a fixed string voltage and performance can be monitored via the SolarEdge monitoring portal. ‚ Each power optimser is equipped with the unique SafeDC feature which automatically shuts down module voltage whenever inverter or grid power are shut down. If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: P404-4RM4MRM Weight: 0.77 kg Min PPT Voltage: 13 V Max PPT Voltage: 80 V DC Startup Voltage: 13 V DC Shutdown Voltage: 13 V Max Input Voltage: 80 V Max DC Power: 405 W Max AC Power (5 Minutes): 0 W Surge AC Power (1 Second): 0 W Max DC Current: 11 A Max DC Inputs: 1 Has DC Fuses: 0 Connector: MC4 Included Connectors: 1 Euro Efficiency: 98.8 % Transformer: N/A MPPT Quantity : 1 Has Integrated DC Switch: No Warranty: 25 years Providers of distributed solar power harvesting and PV monitoring systems. SolarEdge maximises power generation of residential and large scale PV systems for faster return on investment. Possible Alternatives S500-B-MC4 Solar Edge S500B Power Optimizer

eddi has the option to install a Relay &Sensor board which allows for many different wiring configurations and includes the following features: ‚ Two independent multi-function relays (16Amp) eSense input (isolated 230V detection for low tariff etc.) Two temperature sensor inputs (PT1000) ‚ The two relays can be independently set for several different functions, or they can be set to operate as a pair. The relay functions include: ‚ “ Export Threshold “ Import Threshold “ Operate when heating “ De-stratification pump control “ Timed operation “ Fault signal for BMS systems ‚ Please refer to the eddi manual for fitting diagrams. If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: MYEN-EDDI-RLYBD Weight: 0.5 kg

Current transformer and 5m cable assembly for use with myenergi harvi, eddi and zappi. Additional clamp is required if you want to monitor realtime PV/wind generation with your eddi or zappi. If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: CT100-16-05 Weight: 0.19 kg

The‚ Hallhook„‚ from Genius Roof Solutions is a permanent, secret and fail safe device that should be used when replacing a broken slate. The Hallhook was invented by a slater and tiler with 45 years of trade under his belt who couldn't stand to see a slate tiled roof covered with unsightly lead or copper straps. He tried all other available slate repairs such as straps, blobs of silicone, plastic proucts that are not only unsightly but time-consuming to install, etc. and then went on to develop the Hallhook.‚ When to use the Hallhook„‚ For general repair After solar panel bracket mounting After roof light/window installation After installing slate vents This is a pack of 10 pcs. If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: HHK001 Items in this pack: 10 Weight: 0.14 kg Possible Alternatives GEN-SLATE Genius Roof - Slate Refit Kit

HQC4 Connector pair (1x Male, 1x Female) for Q-Cells If you have any technical queries about this product or wish to report any issues with the information on this page then please use the Contact Form to contact us. Supplier Part No: HQC4-PAIR Weight: 0.042 kg